ECOFILM MHF

The foil heats the mirror and thus prevents its fogging. There is a thin layer of glue on the foil with which the foil is glued onto the rear side of the mirror. The power supply lead (1m long; 5x3mm oval cross section) is fitted with a plastic cover (6mm thick) at the place where it is connected. Space for the cover and outlet of the lead must be created at the place of connection below the mirror. The supply lead isn´t fitted with a plug so that it can be pulled through e.g. the wall of a cupboard or a goose neck if needed. The foil is usually connected to the mirror light (230V), but other methods of switching it on and off are possible – an independent switch, a time switch, a movement sensor, etc. Approximately 1-2 minutes after switching the foil on, an area of the mirror which corresponds to the size of the heating foil will defog, and gradually this area will extend up to 10cm beyond the edges of the foil. For glued mirrors, choose the size of the foil in such a way that there is sufficient mirror edge left outside the perimeter of the foil for the gluing of the mirror (sealant will not stick to the heating foil). We recommend that larger/heavier mirrors are fitted using a mounting frame.