PDS1P heating cables
Heating cables used to speed up the curing of concrete in the winter period. They are intended for short-term use, and are employed once only; after the curing process has ended, the cables are disconnected and they remain in the concrete block.
PDS1P heating cables
PDS1P heating cables
PDS1P heating cables are products for special applications – in this specific case, these are cables for single short-term use during the winter period to speed up the curing and hardening of concrete. Installation and use of these heating cables is possible in temperatures down to -10°C. After the curing process is complete, the cables are disconnected (cut off) and remain “lost” in the concrete slab. The cables are intended exclusively for industrial use and are produced in compliance with IEC 60800. The heating circuit (IP 67) ends with a 2m long H05RR-F supply cable with a moulded-on Uni-Schuko plug (IP 20). It is to be connected to the 230 V network. A table of recommended spacings and wattages can be found below.
PDS1P 40 W/m
| Type | Output | Length | Resistance | Cat. No. |
|---|---|---|---|---|
| [W] | [m] | [Ω] | ||
| PDS1P 40130 | 130 | 3.3 | 404.3 | 2325000 |
| PDS1P 40380 | 380 | 10.0 | 140.2 | 2325005 |
| PDS1P 40735 | 735 | 20.0 | 68.0 | 2325008 |
| PDS1P 401400 | 1400 | 35.0 | 37.8 | 2325018 |
| PDS1P 401500 | 1500 | 38.0 | 35.3 | 2325020 |
| PDS1P 402200 | 2200 | 55.0 | 24.0 | 2325025 |
| PDS1P 403200 | 3200 | 85.0 | 16.7 | 2325028 |
Self-regulating cables
Heated rubber S-MAT
The D-MAT heating sheetExamples of operating costs
