| FENIX

ECOFLOOR production department

Come with us to the production premises of the FENIX company, where the products of the ECOFLOOR series are manufactured under the hands of experienced operators.

The cut in the heating cable was repaired with a breakable terminal block and insulated with black electrical insulating PVC tape. As the several layers of adhesive tape show, the person in question certainly didn´t want to underestimate the repair….

Unprofessional repairs

The unprofessionally performed repair of heating cables results, unnecessarily, in significantly higher damage.

This is one case when an investor asked for our opinion before the floor was covered. The heating cables are insufficiently attached, the clips are too far apart, and the cable is “floating” on the floor. If the screed had been poured, the cables may have come into contact with one another or even crossed, which would have led to the overheating and interruption of the cable. In the right half of the photo, there are loose cables in the immediate vicinity of the floor probe gooseneck, which would have...

Incorrect installation

The most common mistakes when laying heating cables and mats

Virtually the whole connector has been pulled into the perimeter wall, where there is no reliable heat dissipation. The second mistake is the bending of the heating cable immediately after the connector – heating and the different expansion of materials in the bend create cyclic mechanical stress on the joint, which can lead to its interruption

Heating cable connectors

A very common mistake is the damaging or incorrectly placement of heating cable connectors.

PSV cables with stranded resistance from 1. 1. 2016

Since the beginning of 2016, we have improved the structure of one of our bestselling PSV heating cables.

Read more

ECOFLOOR production department

Unprofessional repairs

Incorrect installation

Heating cable connectors

PSV cables with stranded resistance from 1. 1. 2016